Pacific Slate in a Granite finish
Pacific Slate in Granite and Sandalwood finishes
Pacific Slate in a Granite finish
Pacific Slate in a Sandalwood finish
Pacific Slate in a Sandalwood finish
Pacific Slate in Granite and Sandalwood finishes
Pacific Slate in a Sandalwood finish
Pacific Slate in a Granite finish
Our Pacific Slate finish, with the sophisticated appearance of natural stone, opens up a variety of combinations whether used on its own or in conjunction with the Classic Standard Series. Pacific Slate finish is available in Standard, Half Standard and Double Standard.
Note: This product has been discontinued from the supplier, limited stock available.
Charcoal
LIMITED STOCK
Granite
LIMITED STOCK
Sandalwood
LIMITED STOCK
Teak
LIMITED STOCK
While the colors shown here are represented as accurately as possible, they should only be used as a guide. Actual samples should be viewed before making a final color selection.
| PAVER TYPE |
PAVER COLOUR |
PART NUMBER |
DIMENSIONS (W x L x D) |
PAVERS PER SQ FT |
PALLET QUANTITY |
PALLET COVERAGE |
PALLET WEIGHT |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Half Standard |
|
4-7/16" x 4-7/16" x 2-3/8"D 112.5 x 112.5 x 60 mm |
7.3 pcs/ft² | 720 pcs | 98 sq ft 9.104 m² |
2,800 lbs 1,270 kg |
|||||||
| Standard |
|
4-7/16" x 8-7/8" x 2-3/8"D 112.5 x 225 x 60 mm |
3.65 pcs/ft² | 360 pcs | 98 sq ft 9.104 m² |
2,800 lbs 1,270 kg |
|||||||
| Double Standard |
|
8-7/8" x 8-7/8" x 2-3/8"D 225 x 225 x 60 mm |
1.35 pcs/ft² | 180 pcs | 98 sq ft 9.104 m² |
2,800 lbs 1,270 kg |
|||||||
NOTE: Efflorescence is a whitish powder like deposit of calcium carbonate that may appear on the product. It is a natural by-product of the cement hydration process and is inherent in all concrete products. It will usually wash or wear off in the course of time. If you do not wish to wait for this natural process to occur, cleaners designed specifically for removal are available. Contact your local dealer. DO NOT USE MURIATIC ACID directly as it will damage the color. Efflorescence in no way affects the integrity of the product, and is not a cause for rejection. Cleaning and sealing can take place immediately after installation, weather permitting. If you’ve used Polymeric Joint Sand, instead of Interlocking Paver Joint Sand, you must refer to the polymeric joint sand and/or sealer manufacturer’s recommended application instructions.
Runner Bond
Standard = 100% of area
45º Herringbone
Standard = 100% of area
90º Herringbone
Standard = 100% of area
Parquet
Standard = 100% of area
Double Standard/Half Standard
Double Standard = 80% of area
Half Standard = 20% of area
90˚ Lattice
Double Standard = 45% of area
Standard = 45% of area
Half Standard = 10% of area
45˚ Lattice
Double Standard = 45% of area
Standard = 45% of area
Half Standard = 10% of area
Ashlar Pattern
Double Standard = 50% of area
Standard = 25% of area
Half Standard = 25% of area
Double Standard/Standard II
Double Standard = 27% of area
Standard = 73% of area