Texada Slab Pavers in a Natural finish
Texada Slab Pavers in a Natural finish
Texada Slab Pavers in a Charcoal finish
Texada Slab Pavers in a Natural finish
Texada Slab Pavers in a Natural finish
Ideal for applications that require durability and strength
The Texada with its light Shot-Blast finish, provides a smooth non-skid surface with top edges chamfered for a neat appearance. HydraPressed Slabs are ideal for applications that require durability and strength with the look of elegance. The slabs can be installed using either the 'sand set' method or on adjustable pedestals, which allow for sloping or levelling as required.
Patios
Pools
Walkways
Not for Driveways
Durafusion
Charcoal
Natural
PLEASE NOTE: While the colors shown here are represented as accurately as possible, they should only be used as a guide. Actual samples should be viewed before making a final color selection. For best results, pavers should be installed from several pallets to ensure color consistency, especially with multi-color blends.
Order by the piece or by the pallet. Note: some colours Special Order only.
Texada HydraPressed Slabs have a light shot-blast “architectural finish” producing subtle colors with a distinctive elegant appearance.
HydraPressed Slabs are made to precision sizes with true edges that fit together tightly. Top edges are chamfered for a neat appearance.
HydraPressed Slabs are hydraulically pressed using an advanced method of producing concrete paving that requires 400 tons of hydraulic pressure, resulting in a cured slab with incredible strength and durability.
| SLAB TYPE |
SLAB COLOUR |
PART NUMBER |
DIMENSIONS (W x L x D) |
PIECE COVERAGE |
PALLET QUANTITY |
PALLET COVERAGE |
WEIGHT EACH |
PALLET WEIGHT |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 18" x 18" |
|
18" x 18" x 1-5/8" 457 x 457 x 40 mm |
2.25 sq ft 0.209 m² |
60 pieces | 135 sq ft 12.54 m² |
48 lbs 21.82 kg |
2,900 lbs 1,315 kg |
|||||
| 12" x 24" |
|
12" x 24" x 2" 305 x 610 x 50 mm |
2.00 sq ft 0.1858 m² |
48 pieces | 96 sq ft 8.91 m² |
50 lbs 22.72 kg |
2,300 lbs 1,043 kg |
|||||
| 24" x 24" |
|
24" x 24" x 2" 610 x 610 x 50 mm |
4.00 sq ft 0.3716 m² |
25 pieces | 100 sq ft 9.29 m² |
100 lbs 45.45 kg |
2,400 lbs 1,089 kg |
|||||
NOTE: Efflorescence is a whitish powder like deposit of calcium carbonate that may appear on the product. It is a natural by-product of the cement hydration process and is inherent in all concrete products. It will usually wash or wear off in the course of time. If you do not wish to wait for this natural process to occur, cleaners designed specifically for removal are available. Contact your local dealer. DO NOT USE MURIATIC ACID directly as it will damage the color. Efflorescence in no way affects the integrity of the product, and is not a cause for rejection. Cleaning and sealing can take place immediately after installation, weather permitting. If you’ve used Polymeric Joint Sand, instead of Interlocking Paver Joint Sand, you must refer to the polymeric joint sand and/or sealer manufacturer’s recommended application instructions.
Runner Bond
12"x24" = 100% of area
90º Herringbone
12"x24" = 100% of area
Parquet
12"x24" = 100% of area
Pattern 2
24"x24" = 27% of area
12"x24" = 73% of area
| 18"x18" SLAB | 12"x24" SLAB | 24"x24" SLAB |
|---|---|---|
 |
 |
 |
| 4.9 – 6.5 pedestals / square m |
5.4 – 7.1 pedestals / square m |
2.8 – 3.5 pedestals / square m |
| .45 – .60 pedestals / square ft |
..51 – .66 pedestals / square ft |
.26 – .33 pedestals / square ft |
| 1.0 –1.36 pedestals / paver |
1.0 – 1.3 pedestals / paver |
1.0 – 1.3 pedestals / paver |
Formula Example: TOTAL number of square feet multiplied by number of pedestals per square foot equals TOTAL number of pedestals required.
Please Note: All pedestal quantities are estimates only and may vary slightly depending on pattern utilized.
Belgard Texada Slab Cut Sheet