Hide Menu

Allan Block Aztec 6°

AB Aztec Collection in a Silverado finish

Inspired by the walls in Cusco, Peru which are more than 500 years old. No need to learn the tricks of a new system, AB® Aztec uses the same installation steps and engineering calculations as the AB® Classic Collection. Perfectly textured surface couples with a sharp, clean profile with 6° setback. Some block sizes have been discontinued from the supplier.

AVAILABLE COLOUR

Silverado

BLOCK TYPES

Aztec Block

Aztec Jumbo
Limited Stock

Aztec Lite
Limited Stock

Aztec Half Light
Limited Stock

Aztec Corner

BLOCK
TYPE
BLOCK
COLOUR
PART
NUMBER
DIMENSIONS
(W x H x D)
BLOCK
COVERAGE
PALLET
COVERAGE
PALLET
QUANTITY
PALLET
WEIGHT
AB Aztec Classic
(6 Degree)
Silverado 16053082
18" x 8" x 12"
460 x 200 x 300 mm
1.0 sq ft
0.0929 m²
40 sq ft
3.716 m²
40 pcs 3,298 lbs
1,496 kg
AB Aztec Jumbo
(6 Degree)
DISCONTINUED
Silverado 16054563
9" x 8" x 9.5"
230 x 200 x 240 mm
0.5 sq ft
0.0465 m²
50 sq ft
4.645 m²
100 pcs 3,862 lbs
1,752 kg
AB Azteec Classic Lite
(6 Degree)
DISCONTINUED
Silverado 16054562
18" x 4" x 12"
460 x 100 x 300 mm
0.5 sq ft
0.0465 m²
36 sq ft
3.344 m²
72 pcs 3,856 lbs
1,749 kg
AB Aztec Classic Jr.
Half Lite
(6 Degree)
DISCONTINUED
Silverado 16054561
9" x 4" x 10.5"
230 x 100 x 267 mm
0.5 sq ft
0.0465 m²
20 sq ft
1.858 m²
80 pcs 1,861 lbs
846 kg
AB Aztec 16" Corner
(6 degree)
Silverado 16100058
16" x 8" x 8"
400 x 200 x 200 mm
- - 30 pcs 2,353 lbs
1,067 kg
AB Aztec 18" Straight Cap
3" Overhang
Charcoal 16100060
18" x 3.75"H x 12"
460 x 95 x 300 mm
1.5 lineal ft
0.457 lineal m
84 lineal ft
25.60 lineal m
56 pcs 3,222 lbs
1,461 kg

All colours and/or products may not be available in all areas. Please inquire for availability and special order options.

INSTALL VIDEOS
View Install Videos

How to Build a Retaining Wall - Gravity Walls

How to Build a Retaining Wall - Curves

Retaining Wall Finishing Options

How to Build Stairs in a Retaining Wall

A Note on Efflorescence

NOTE: Efflorescence is a whitish powder like deposit of calcium carbonate that may appear on the product. It is a natural by-product of the cement hydration process and is inherent in all concrete products. It will usually wash or wear off in the course of time. If you do not wish to wait for this natural process to occur, cleaners designed specifically for removal are available. DO NOT USE MURIATIC ACID directly as it will damage the color. Efflorescence in no way affects the integrity of the product, and is not a cause for rejection. Cleaning and sealing can take place immediately after installation, weather permitting.