NO-Slip is available in 12 oz bags

Perfect for use on areas such as walkways, pool sides, entry ways, driveways, garage floors and patios.

For use in all film forming concrete and masonry sealers.

No-Slip is a micronized polymer (finely ground) Slip Resistant Additive that has been designed specifically for use in GST film forming sealers, which include: all Wet Look Lacquers, Lock ‘N Seal and Satin Seal. No-Slip provides a comfortable walking surface for bare feet and will not dissolve in solvents, absorb oil or expand in water.

  1. GST’s No-Slip must be applied using our GST Low Pressure Pump Sprayer
  2. To ensure even application of No-Slip, continuous agitation while spraying is required
  3. Using a brush or roller will cause uneven distribution of No-Slip additive, resulting in slippery areas
  4. When applying No-Slip to pool coping, use an overspray paint shield to avoid getting sealer in the pool
  5. Be sure to clean paint shield often to avoid excess sealer/No-Slip contaminating the pool water.
  6. NO-Slip cannot be used with penetrating sealers and must be used with film forming sealers.
  QUANTITY WEIGHT
GST512B 12 oz 1 lbs (2.2 kg)

Technical Specifications