|
|
|
OAS/44120
|
|
|
Germany
|
- The successful high-performance multi-zone filter for koi and larger pond - completely redesigned
- The BioTec ScreenMatic 2 has a double-sealed motor and a reinforced screen for an extended service life
- The new foam design and optimized water level control ensure longer filter service life, improved filtration, and reduced maintenance
- Intelligent cleaning sensors detect the pollutant level and automatically activate the screen
- An active LED display shows the required cleaning measures. Manual belt run is now possible via a push button
- Optimized water distributor ensure an ideal water flow over a broad range of pumps, with no clogging
- Sludge basket completely redesigned for greater volume and greater convenience in handling, with built-in overflow holes
- New, innovative design reduces contamination by preventing water from leaking back into the filter chamber
- Rubberized separator lip removes debris from screen and drops the debris into the sludge basket
- Includes a brush for easy cleaning of the belt filter
- Features storm-safe fastening clips on each lid that ensure safety during heavy winds
- Included 2 year warranty + 1 with online registration.
| Biotec |
24000 Screenmatic 2 |
| Max. Recommended Pond Size |
18,000 gallons |
| Max. Recommended Flow |
3300 gph |
| Inlet Connections |
1", 1.25", 1.5" |
| Outlet Size (mm) |
4 in. (DN 110) |
| Dimensions (L x W x H) |
31" x 23" x 25.4" |
| Weight (lbs) |
66.0 |
| Part Number |
OAS/44120 |
| DESCRIPTION |
BioTec Screenmatic 2 18,000 |
BioTec Screenmatic 2 24,000 |
BioTec Screenmatic 2 38,000 |
| VOLTS |
120 |
| WATTS |
5 |
| OUTLET |
3" adapter |
DN 110 - requires 4" rubber coupling (not included) |
| NET WEIGHT |
55 lbs. |
66 lbs. |
209 lbs. |
| MIN FLOW |
1,585 gph |
2,110 gph |
| MAX FLOW |
2,900 gph |
3,300 gph |
4,620 gph |
| CORD LENGTH |
6' + 16' |
| DIMENSIONS |
31"L x 23"W x 21.5"H |
31"L x 23"W x 25.5"H |
52.5"L x 25"W x 33"H |
| HOSE SIZE |
1", 1.25", 1.5" |
1", 1.25", 1.5", 2" |
| pond VOLUME |
up to 18,000 gal |
up to 24,000 gal |
up to 39,000 gal |
| INCLUDES |
2 blue filter foams,
3 purple filter foams,
3 red filter foams,
3 phossless filters |
4 blue filter foams,
6 purple filter foams,
6 red filter foams,
4 phossless filters |
4 blue filter foams,
7 purple filter foams,
7 red filter foams,
12 phossless filters |
| Warranty |
2-year + 1 |
| Part Number |
OAS/42975 |
OAS/44120 |
OAS/42976 |
TROUBLESHOOTING TIPS:
- Check the connections — some units have had instances where the connection on the bar to the motor is loose which causes it not to turn.
- Clean the sensor bar. The bar has two little probes that when they touch water tell the motor to turn. There can also be scale buildup on the sensor so maybe a soak in vinegar could be helpful.
- If the sensor is touching water but not activating it could be that the hardness is too low in the water for conductivity. This is like the ionizer — in some cases, adding salt to the pond will raise the conductivity.
- The unit will flash red if it cleans 20 times continuously — this usually can be addressed by the above AND moving the sensor bar down a bit so it is not in constant contact with the water. When the unit is installed move the sensor bar as far down and away from the incoming flow as possible. Leave it for a day and position it so it is just behind where the layer of debris has built up on the screen.
|
